|
Centrifugal Mist Eliminators
Screw machines, CNC lathes, chuckers, and bar machines produce mist and smoke. Centrifugal Mist Eliminators remove, trap, and reclaim submicronic contaminants from the plant atmosphere—right at
the source!
 Centrifugal Mist Eliminators operate on the principle of centrifugal separation of sub-micron particles. A perforated, rapidly spinning drum traps and retains
captivated mist until it's grown to droplet size. Centrifugal force throws the droplets free of the perforated drum to the inner wall of the casing. High velocity air drives the liquefied oil along the walls and through the
circumferential slot into a collection chamber. Clean air returns to the plant environment, by way of the exhaust grill, and the clean, recycled oil drains from the unit for reuse or disposal.
Designed to source-capture air pollutants, choose a Centrifugal Mist Eliminator if you need a compact unit to mount directly to a machine and
when the contaminants are usually just mist and smoke. Directly mounted units eliminate unsightly ductwork, venting outdoors, and the high cost of make-up air. Housed in a sturdy, 16-gauge steel encasement, Centrifugal Mist
Eliminators stand up to tough, industrial environments. Units weigh from only 74 to 125 lbs. and operate from only 70 to 76 dBA. CFM capabilities range from 100 to 1200. Standard features include a coated, perforated
rotating drum, large collection chamber, and advanced drain system. Maintenance is easy—just replace the inexpensive throwaway liner.
Standard Mist Eliminators deliver a particulate efficiency of 98% at 1.0 micron. When equipped with an optional HEPA filter, efficiency is 99.97% at 0.3 microns.
Above picture shown with optional prefilter and optional HEPA afterfilter.
|
Standard Units
|
Part Number
|
Price
|
|
CM-100, 100CFM, 3-7/8”o.d. inlet
|
ECM5001-01
|
$ 1,618.00
|
|
CM-200, 200CFM, 3-7/8”o.d. inlet
|
ECM5001-02
|
$ 1,687.00
|
|
CM-300, 300CFM, 3-7/8”o.d. inlet
|
ECM5001-03
|
$ 1,800.00
|
|
CM-500, 500CFM, 5-7/8”o.d. inlet
|
ECM5001-04
|
$ 1,989.00
|
|
CM-700, 700CFM, 5-7/8”o.d. inlet
|
ECM5001-05
|
$ 2,093.00
|
|
CM-900, 900CFM, 5-7/8”o.d. inlet
|
ECM5001-06
|
$ 2,355.00
|
|
CM-1200, 1200CFM, 5-7/8”o.d. inlet
|
ECM5001-07
|
$ 2,411.00
|
|
* Standard units include filters, TEFC motor, fabrica mounting washers (4), drain kit with fittings and 10-ft
drain hose. Standard motor input power 190/380, 230/460V, 50/60Hz.
* Options include Prefilters, HEPA afterfilter
|
|
Standard Units with HEPA Afterfilter
|
|
|
|
CMH-100
|
ECM5001-08
|
$ 2,200.00
|
|
CMH-200
|
ECM5001-09
|
$ 2,287.00
|
|
CMH-300
|
ECM5001-10
|
$ 2,560.00
|
|
CMH-500
|
ECM5001-11
|
$ 2,740.00
|
|
CMH-700
|
ECM5001-12
|
$ 3,000.00
|
|
CMH-900
|
ECM5001-13
|
$ 3,250.00
|
|
CMH-1200
|
ECM5001-14
|
$ 3,350.00
|
|
* Standard units with 12” x 12” x 6” HEPA on Models CM-100, CM-200
* Standard units with 12” x 24” x 12” HEPA on other Models
|
|
Add-On Options
|
|
|
|
Add-on Prefilter, small
|
ECM5016-01
|
$ 320.00
|
|
Add-on Prefilter, large
|
ECM5016-02
|
$ 383.00
|
|
Accessories
|
|
|
|
Flange Connector, 4”
|
ECM5014-01
|
$ 68.00
|
|
Flange Connector, 6”
|
ECM5014-02
|
$ 83.00
|
|
Reducer, 6” - 4”
|
ECM5015-01
|
$ 80.00
|
|
Y-Fitting, 4”x4”x4”
|
ECM5013-03
|
$ 160.00
|
|
Y-Fitting, 6”x6”x4”
|
ECM5013-04
|
$ 234.00
|
|
Y-Fitting, 6”x4”x4”
|
ECM5013-02
|
$ 305.00
|
|
Y-Fitting, 6”x6”x6”
|
ECM5013-01
|
$ 193.00
|
|
Flex Hose, 4” x 10-ft
|
E1051-01
|
$ 120.00
|
|
Flex Hose, 6” x 10-ft
|
E1051-02
|
$ 130.00
|
|
Hose Clamp, 4” set
|
E1050-10
|
$ 25.00
|
|
Hose Clamp, 6” set
|
E1050-11
|
$ 28.00
|
|
Floor Pedestal Mount, 6’6”
|
ECM5051-78
|
$ 320.00
|
|
Vibration Isolator Kit
|
ECM5007-01
|
$ 58.00
|
|
